Gateway LX6200 8513217 - Gateway Hardware Reference Guide - Page 60
thumbscrew you removed previously.
View all Gateway LX6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
CHAPTER 5: Upgrading Your Computer 5 If you are replacing a drive, note any jumper settings on the old drive (if any) and set the jumpers on the new drive to be the same. - OR - If you are adding a new drive, set the jumpers as instructed by the drive's user guide. 6 Secure the new hard drive into the cage using the screws that you removed previously or that were provided with the drive. 7 Install the hard drive cage back into the computer by aligning the rails on the top of the cage with the slots on the bottom of the optical drive cage. Hard drive cage mounting rail Hard drive cage mounting rail 8 Secure the hard drive cage to your computer with the thumbscrew you removed previously. 9 Connect the drive cables on the right side of the computer. If you are replacing a drive, use your notes from Step 2. 10 Replace the side panels by following the instructions in "Replacing the side panels" on page 48. 11 Reconnect all external cables and the power cord. 12 Turn on your computer. 54