GE 28811FE2 User Guide - Page 21
Set Alarm Clock
UPC - 044319805086
View all GE 28811FE2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
6. The receiving handset will turn on the microphone and the originating handset will turn on the speakerphone to monitor sound from the receiving handset. NOTE: For room monitoring mode to work, the originating handset must NOT be on the cradle. NOTE: While in room monitoring mode, the handsets will emit an alert tone approximately every 5 seconds if there is an incoming call. You may press the SPEAKER button to quit room monitor and answer the call. NOTE: While in room monitoring mode, the originating handset can be switched to monitor by handset earpiece by pressing the TALK button once. Switch back to speakerphone by pressing the SPEAKER button once. NOTE: Press the END/cancel button on the handset to exit room monitor mode. Set Alarm Clock 1. Make sure your phone is OFF (not in TALK mode). 2. Press the mute/menu OK button to go to the main menu. 3. Press CALLER ID-VOLUME ( 6 or 5) button to scroll to ALARM. 4. Press mute/menu OK button to enter the submenu, ALARM 1ON 2OFF shows on the display. 5. Use the touch-tone pad to enter the selection, or use the CALLER ID-VOLUME ( 6 or 5) button to scroll to 1ON or 2OFF. 6. If you select ON, press the mute/menu OK button to confirm and advance Set Alarm Time sub-menu. 7. Use the number keys to enter the time, then press the #/pause button to toggle between AM and PM. 8. Press the mute/menu OK button to confirm and advance Set Cycle Time sub-menu. 9. Use the CALLER ID-VOLUME ( 6 or 5) button to select Once or Daily. The default setting is Once. 10. Press the mute/menu OK button to save your selection. You will hear a confirmation tone. NOTE: If you select Daily, the system will follow the current time setting to turn on the alarm. 21