GE AEE18DP User Manual - Page 11
Prepare The Window And Install, The Case, The Case Continues
View all GE AEE18DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Installation Instructions 5 PREPARE THE WINDOW AND INSTALL THE CASE A Cut the window sash seal to the proper length . Peel off the backing and attach the seal to the underside of the window sash . 5 PREPARE THE WINDOW AND INSTALL THE CASE (continues) E Position the V-supports on the case bottom so that they will be near the outside wall. Attach a V-support to each side of the bottom of the case with Type E bolts, 2 for each support. V-support F Adjust sill angle brackets to rest on sill. B Open the window and mark the center of the window sill. C Carefully slide the case into the window and center the case. Lower the window behind the top mounting rail. Pull the bottom of the case forward so that the bottom mounting rail is tight against the back of the window stool. Mount the case to the window sill using 2 type B screws. Drill pilot holes, if necessary. Stool 2 type B screws D Assemble the V-support and V-support bracket with Type F nut and bolt Type E bolt and nut Left Sill angle bracket Right V-support Type F bolt and nut Sill Bracket G Extend the left and right accordion panels to the vertical window sashes. Drill pilot holes and attach the top corners with 2 type C screws. Type C screw Type C screw 11