GE AEE18DP User Manual - Page 9

Installation Instructions 1 WINDOW REQUIREMENTS • These instructions are for a standard double-hung window . You will need to modify them for other types of windows . • All supporting parts must be secured to firm wood, masonry or metal . • The electrical outlet must be within reach of the power cord . • Follow the dimensions in the table and illustration for your model . 18 15/32" 26"- 41" (With accordion panels) 3 PREPARE THE AIR CONDITIONER A Remove the two control knobs . B Pull down the front panel and remove the filter . Remove the front panel by lifting up at an angle . C Remove the four front screws. Save them for reinstalling the front housing. 2 STORM WINDOW REQUIREMENTS A storm window frame will not allow the air conditioner to tilt toward the outside, and will keep it from draining properly . To adjust for this, attach a piece of wood to the sill . WOOD PIECES WIDTH: 2" LENGTH: Long enough to fit inside the window frame . THICKNESS: To determine the thickness, place a piece of wood on the sill to make it 1/2″ higher than the top of the storm window frame or the vinyl frame . Attach securely with nails or screws provided by the installer . 1/2″ higher than storm window frame Storm window frame 1/2″ higher than vinyl frame (on some windows) Wood Sill Vinyl frame D Grasp the lower corners of the grille while pressing in on the case sides with your finger tips. Pull out to release and lift it up. NOTE: Do not pull the bottom edge toward you more than 3″ or you may damage the tabs of the grille. 9