GE AEE18DP User Manual - Page 12
Caution
View all GE AEE18DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Installation Instructions 5 PREPARE THE WINDOW AND INSTALL THE CASE (continues) H CAUTION: To prevent broken Vinyl glass or damage to windows, on vinyl or other similarly constructed windows, attach the window locking bracket to the window side jamb. Attach the window locking bracket with one Type C screw . This unit contains two window locking brackets . Wood I Cut the foam top window gasket to the window width. J Stuff the foam between the glass and the window to prevent air and insects from getting into the room. NOTE: If the gasket supplied does not fit your window, obtain appropriate material locally to provide a proper installation seal. 6 INSTALL THE AIR CONDITIONER IN THE CASE (continues) B Replace the 1 screw removed earlier, one on each side of the case. IMPORTANT: THE GROUND SCREWS MUST BE REINSTALLED TO ENSURE PROPER GOUND. C Attach the front grille to the case by inserting the tabs on the grille into the slots on the front top of the case. Push the grille in. 6 INSTALL THE AIR CONDITIONER IN THE CASE A Slide the air conditioner into the case by the base pan. Do not push on the controls, styrofoam air discharge housing or the finned coils. Make sure the air conditioner is firmly seated. D Replace the screws. E Install the filter and the front grille. Base Pan Do not press on these areas- damage to the unit may result F Plug in the air conditioner. 12