GE AJCS12DCB Owners Manual - Page 21

Installation instructions [] INSTALL WINDOW GASKET AND LOCKING BRACKET [] Cut the foam top window gasket to the window width. [] Stuff the foam between the glass and the window to prevent air and insects from getting into the room. [] Attach the window locking bracket with 1 type E screw. I [] REPLACE AIR CONDITIONER IN CASE [] Carefully slide the air conditioner back into the case. [] When the wall outlet is to the left, extend the cord under the unit and hold it in place with the clamp. [] Attach the power cord to the base pan with the clamp. pan Power cord P [] Reinstall the locking plate with the tab behind the wall case flange. Tighten the screw. _1 Y \1 _'_1t_/ •s hten Loc_i_g _ __ [] Reattach the front grille. An opening for the power cord is on the bottom of the front grille. [] Fill holes and cracks with caulking provided by the installer. 21