GE GFSF2KEXCC Use and Care Manual - Page 17
Installation Instructions, REMOVE THE FRESH FOOD, DOOR HANDLE, REMOVE THE FREEZER DOOR HANDLE
View all GE GFSF2KEXCC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Installation Instructions 6 REMOVE THE FRESH FOOD DOOR HANDLE (For placement in the installation location or reversal of the handles - on some models) Stainless steel (on some models): A REMOVING THE DOOR HANDLE: Loosen the set screws with the 3/32″ A Badge Allen wrench and remove the handle. B NOTE: For Double Door models follow the same procedure on Mounting Fasteners (appearance may vary) the opposite door. 7 REMOVE THE FREEZER DOOR HANDLE Stainless steel and plastic handles: A Loosen the set screws located on the underside of the handle with the 1/8″ Allen wrench and remove the handle. NOTE: If the handle mounting fasteners need to be tightened or removed, use a 3/16″ Allen wrench. A Plastic handle (on some models): A REMOVING THE DOOR HANDLE: Depress the tab on the underside of the handle and slide the handle up and off of the mounting fasteners. REVERSING THE DOOR HANDLE (on some B models): • Remove Badge the handle mounting fasteners with A a 3/16″ Allen wrench and transfer Mounting Fasteners the handle mounting fasteners to (appearance may vary) the right side. • Remove the logo badge. • Remove and transfer the plug button to the left side of the fresh food door. NOTE: Use a flat plastic edge to prevent damaging the door. Remove any adhesive on the door with a mild detergent. Remove the paper covering on the adhesive backing on the logo badge prior to carefully attaching the badge to the door. 17