GE GFWS2605FMC Use and Care Manual - Page 15
Cleaning the Pump Filter
View all GE GFWS2605FMC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Cleaning the Pump Filter Due to the nature of the front-load washer, it is sometimes possible for small articles to pass to the pump. The washer has a filter to capture lost items so they are not dumped to the drain. To retrieve lost items, clean out the pump filter. 1. Using a small flathead screwdriver or coin, open the access door. 2. Place a shallow pan or dish under the pump access door and towels on the floor in front of the washer to protect the floor. It is normal to catch about a cup of water when the filter is removed. 3. Pull down the pour spout. 4. Turn the pump filter counterclockwise and remove the filter slowly, controlling the flow of the draining water. 5. Remove the filter and clean the debris from the filter. 6. Replace the filter and turn clockwise. Tighten securely. 7. Flip up the pour spout. 8. Close the access door by hooking the bottom tabs first, then rotating the access door shut. GEAppliances.com Pump filter 15