GE GFWS2605FMC Use and Care Manual - Page 3

GEAppliances.com PROPER INSTALLATION This washer must be properly installed and located in accordance with the Installation Instructions before it is used. If you did not receive an Installation Instructions, you can receive one by visiting GEAppliances.com or by calling 800.GE.CARES (800.432.2737). „ Ensure that the hot water hose is connected to the "H" Parts and Accessories (internal red screened) valve and the cold water hose is connected to the "C" (internal blue screened) valve. Order on-line at GEApplianceparts.com today, 24 hours a day or by phone at 800.626.2002 during normal business „ Install or store where it will not be exposed to hours. temperatures below freezing or exposed to the weather, which could cause permanent damage and invalidate the Part Number Accessory warranty. PM14X10002 4 ft Rubber Water Supply Hoses „ Properly ground washer to conform with all governing codes and ordinances. Follow details Or PM14X10005 4 ft Braided Metal Water Supply Hoses in Installation Instructions. WX10X10011 Tide® Washing Machine Cleaner* „ This washer does not include water supply hoses. WX7X1 Washer Floor Tray GE strongly recommends the use of factory specified parts. A list of factory hoses available for purchase are listed below. These hoses are manufactured and tested to meet GE specifications. GE strongly recommends the use of new water supply hoses. Hoses degrade over time and need to be replaced every 5 years to reduce the risk of hose failures and water damage. WHEN NOT IN USE „ Turn off water faucets to minimize leakage if a break or rupture should occur. Check the condition of the fill hoses; GE recommends changing the hoses every 5 years. SAVE THESE INSTRUCTIONS * Tide® is a registered trademark of Procter & Gamble 3