GE JB255GJSA Use and Care Manual - Page 24

Maintenance Cont.

Page 24 highlights

CARE AND CLEANING: Maintenance Maintenance (Cont.) Lift-Off Oven Door 7KHGRRULVYHU\KHDY\%HFDUHIXOZKHQUHPRYLQJDQGOLIWLQJWKHGRRU'RQRWOLIWGRRUE\WKHKDQGOH If improperly removed, oven door hinges may suddenly open and can cause personal injury WARNING to appendages near the hinge. Follow instructions below to avoid a risk of injury when removing and re-installing the oven door. To Remove the Door: 1. Fully open the oven door. 2. On each hinge, slide the hinge lock up, making sure it snaps into its fully raised position. 3. Firmly grasp both sides of the door at near the top. 4. Close door until the top of the door is approximately ´IURPWKHUDQJHIUDPH  /LIWGRRUXSDQGDZD\IURPWKHUDQJHXQWLOERWKKLQJH arms are clear of the slots in the range frame. To Replace the Door: 1. Firmly grasp both sides of the door near the top. 2. With the door at the same angle as the removal position, rest the notch in the bottom of the left hinge arm on the bottom edge of the left hinge slot. The notch in the hinge arm must be fully seated onto the bottom of the slot. Repeat for the right side. 3. Fully open the door. If the door will not fully open, the notches in the bottoms of the hinge arms are not seated correctly onto the bottom edge of the slot. Lift the door off the range and repeat Step 2. 4. Push the hinge locks down to the locked position  &ORVHWKHRYHQGRRU Pull hinge locks up to unlock Notch Removal position Push hinge locks down to lock Storage Drawer Removal To remove the drawer: 1. Pull the drawer out until it stops. 2. Lift the front of the drawer until the stops clear the guides. 3. Remove the drawer. To replace the drawer: 1. Place the drawer rails on the guides. 2. Push the drawer back until it stops. 3. Lift the front of the drawer and push back until the stops clear the guides. 4. Lower the front of the drawer and push back until it closes. Rail Stop guide 24 49-88057

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

24
49-88057
Storage Drawer Removal
To remove the drawer:
1. Pull the drawer out until it stops.
2. Lift the front of the drawer until the stops clear the
guides.
3. Remove the drawer.
To replace the drawer:
1. Place the drawer rails on the guides.
2. Push the drawer back until it stops.
3. Lift the front of the drawer and push back until the
stops clear the guides.
4. Lower the front of the drawer and push back until it
closes.
Maintenance (Cont.)
CARE AND CLEANING:
Maintenance
Stop guide
Rail
To Remove the Door:
1. Fully open the oven door.
2. On each hinge, slide the hinge lock up, making sure it
snaps into its fully raised position.
3. Firmly grasp both sides of the door at near the top.
4. Close door until the top of the door is approximately
arms are clear of the slots in the range frame.
To Replace the Door:
1. Firmly grasp both sides of the door near the top.
2. With the door at the same angle as the removal
position, rest the notch in the bottom of the left hinge
arm on the bottom edge of the left hinge slot. The
notch in the hinge arm must be fully seated onto the
bottom of the slot. Repeat for the right side.
3. Fully open the door. If the door will not fully open,
the notches in the bottoms of the hinge arms are not
seated correctly onto the bottom edge of the slot. Lift
the door off the range and repeat Step 2.
4. Push the hinge locks down to the locked position
Pull hinge locks up to unlock
Notch
Push hinge locks down to lock
Removal position
Lift-Off Oven Door
If improperly removed, oven door hinges may suddenly open and can cause personal injury
to appendages near the hinge. Follow instructions below to avoid a risk of injury when
removing and re-installing the oven door.
WARNING