GE JVM2070SK Owners Manual - Page 40
Cooktop Light, Night Light, Oven Light - light bulb
View all GE JVM2070SK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Care and Cleaning ge.com Cooktop Light/ Night Light Replace the burned-out bulb with a 120 volt, 20-watt halogen bulb (WB36X10213), available from your GE supplier. 1 To replace the bulb(s), first disconnect the power at the main fuse or circuit breaker panel or pull the plug. 2 Remove the screw at the right edge of the light cover and push on the left edge of the cover to open. 3 Be sure the bulb(s) to be replaced are cool before removing. After breaking the adhesive seal, remove the bulb by pulling straight out. Replace with the same size and type bulb. 4 Raise the light shield and replace the screw. Connect electrical power to the oven. Remove screw Oven Light Replace the burned-out bulb with a 120 volt, 20-watt halogen bulb (WB36X10213), available from your GE supplier. 1 To replace the oven light, first disconnect the power at the main fuse or circuit breaker panel or pull the plug. 2 Remove the top grille by taking out the screws on top of the grille that hold it in place and sliding the grille to the left (opening the door makes grille removal easier). 3 Lift off the light cover at the left of the top opening. 4 Pinch the clips that hold the light socket in place and lift the socket out. 5 Remove the bulb from the light socket by pulling straight out. Replace with the same size and type bulb, then replace the light socket and cover. 6 Replace the grille and screws. Connect electrical power to the oven. Remove grille screws to remove the grille Light Cover 40