GE PGS950EEFES Use and Care Manual - Page 25

Maintenance

Page 25 highlights

CARE AND CLEANING: Maintenance Maintenance Lift-Off Upper Oven Door The door is very heavy. Be careful when removing and lifting the door. Do not lift door by the handle. To Remove the Door: 1. Fully open the door. 2. Lift up on the hinge lock toward the oven frame until they stop. Oven 3. Close the door to 45 degrees (you will feel the door frame stop). The hinge lock will contact the oven frame. 4. On both sides of the door, press down on the release buttons on each hinge. 5. Lift door up until it is clear of the hinge. 6. Pull on hinge arms slightly to relieve pressure on the locking tabs. 7. Push the hinge locks down onto the hinge. 8. Push the hinges in toward the unit so they are closed. Door frame Release buttons To Replace the Door: 1. Pull the hinges down away from the oven frame to the fully open position. 2. Lift up on the hinge locks toward the oven frame until they stop. 3. The hinges will release to the 45-degree position. The hinge locks will contact the oven frame. 4. Slide the door back onto the hinges. Make sure the buttons pop back out. 5. Fully open the door. 6. Push the hinge locks down onto the hinge. 7. Close the oven door. Push in Pull down 49-85213-1 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

49-85213-1
25
Lift-Off Upper Oven Door
The door is very heavy. Be careful when removing and lifting the door. Do not lift door by the handle.
To Remove the Door:
1. Fully open the door.
2. Lift up on the hinge lock toward the oven frame until
they stop.
3. Close the door to 45 degrees (you will feel the door
stop). The hinge lock will contact the oven frame.
4. On both sides of the door, press down on the release
buttons on each hinge.
5. Lift door up until it is clear of the hinge.
6. Pull on hinge arms slightly to relieve pressure on the
locking tabs.
7. Push the hinge locks down onto
the hinge.
8. Push the hinges in toward the unit
so they are closed.
To Replace the Door:
1. Pull the hinges down away from the oven frame to
the fully open position.
2. Lift up on the hinge locks toward the oven frame until
they stop.
3. The hinges will release to the 45-degree position. The
hinge locks will contact the oven frame.
4. Slide the door back onto the hinges. Make sure the
buttons pop back out.
5. Fully open the door.
6. Push the hinge locks down onto the hinge.
7. Close the oven door.
Maintenance
CARE AND CLEANING:
Maintenance
Oven
frame
Door
frame
Release
buttons
Pull down
Push in