GE PSHS9PGZSS Use and Care Manual - Page 23

Put The Refrigerator In Place, Level The Refrigerator, Level The Doors, Using A 7/16

Get GE PSHS9PGZSS PDF manuals and user guides
UPC - 084691210627
View all GE PSHS9PGZSS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Installation Instructions 4 PUT THE REFRIGERATOR IN PLACE Move the refrigerator to its final location. 5 LEVEL THE REFRIGERATOR The refrigerator can be leveled by adjusting the rollers located near the bottom hinges. Rollers Raise Rollers have three purposes: • Rollers adjust so the door closes easily when opened about halfway. (Raise the front about 5/8" [16 mm] from the floor.) • Rollers adjust so the refrigerator is firmly positioned on the floor and does not wobble. • Rollers allow you to move the refrigerator away from the wall for cleaning. To adjust the rollers: • Turn the roller adjusting screws clockwise to raise the refrigerator, counterclockwise to lower it. Use a 3/8" hex socket or wrench, or an adjustable wrench. Roller adjusting screw 6 LEVEL THE DOORS Adjust the refrigerator door to make the doors even at the top. To align: A Using a 7/16" wrench, turn the door adjusting screw to the right to raise the door, to the left to lower it. NOTE: A nylon plug, imbedded in the threads of the pin, prevents the pin from turning unless a wrench is used. B After one or two turns of the wrench, open and close the refrigerator door and check the alignment at the top of the doors. Doors should be even at top Raise 7/16" wrench 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
23
Installation Instructions
PUT THE REFRIGERATOR IN PLACE
Move the refrigerator to its final location.
4
LEVEL THE REFRIGERATOR
The refrigerator can be leveled by adjusting
the rollers located near the bottom hinges.
Rollers have three purposes:
•
Rollers adjust so the door closes easily when
opened about halfway. (Raise the front about
5/8
”
[16 mm] from the floor.)
•
Rollers adjust so the refrigerator is firmly
positioned on the floor and does not wobble.
•
Rollers allow you to move the refrigerator
away from the wall for cleaning.
To adjust the rollers:
•
Turn the roller
adjusting screws
clockwise to raise
the refrigerator,
counterclockwise
to lower
it. Use a
3/8
”
hex socket or
wrench, or an
adjustable wrench.
5
Rollers
Roller adjusting screw
LEVEL THE DOORS
Adjust the refrigerator door to make the doors
even at the top.
To align:
Using a 7/16
”
wrench, turn the door adjusting
screw to the right to raise the door, to the left
to lower it.
NOTE:
A nylon plug, imbedded in the threads
of the pin, prevents the pin from turning unless
a wrench is used.
After one or two turns of the wrench, open
and close the refrigerator door and check
the alignment at the top of the doors.
6
A
B
Doors should be even at top
Raise
7/16
”
wrench
Raise