GE PT9050SFSS Use and Care Manual - Page 10

USING THE OVEN: Special Features Special Features There are numerous special features that are controlled using the number key pad. • Degree - Fahrenheit or Celsius temperature display • 12hr shutoff - 12 Hour Shutoff • End tone - Cycle End Tone • Sabbath - Sabbath mode • Sound - Tone Volume • Setting - Clock Setting • Auto Recipe - Auto Recipe Conversion (for Convection Baking) • Temp Offset - Adjust the oven temperature (Double ovens have upper and lower options) • Notification Light Bar - Turns the light indicator on or off • Default - Reset control to factory settings To change the Special Features settings follows these guidelines. Press and hold the Traditional Bake and Traditional Broil pads for 3 seconds simultaneously. When you enter the special features mode: • The numbers 2 and 8 act as up and down to scroll thru the features and their settings. • The numbers 4 and 6 act as right and left to change back and forth from scrolling thru the features to changing the feature settings. • The number 5 acts as an enter pad. Press and hold the Traditional Bake and Traditional Broil pads for 3 seconds simultaneously to exit the special feature mode. 1 2 3 1 3 = 4 5 6 Enter 7 8 9 Cook Time 0 Set Clock AM/PM 7 9 Cook Time 0 Set Clock AM/PM Example: Adjusting the Oven Temperature 1. Press and hold the Traditional Bake and Traditional Broil pads for 3 seconds simultaneously to enter special features mode. 2. Press the number 2 pad until the display reads "Temp Offset" (double wall ovens will have a selection for both the upper and lower ovens). 3. Press the number 6 pad to change the special feature setting. 4. Press the number 2 or 8 pads to either increase or decrease the temperature in one degree Fahrenheit increments up to + 35º F or down to -35º F. 5. Press the number 5 pad to save your desired change. 6. Press the number 4 pad to return to the other features. 7. Press and hold the Traditional Bake and Traditional Broil pads for 3 seconds simultaneously to exit the special feature mode. Fahrenheit or Celsius Temperature Display Your oven control is set to use Fahrenheit temperature units but can be changed to use Celsius temperature units if preferred. Cycle End Tone This is the tone that signals the end of a timer. You can change it to be one tone (bEEP) or a continuous repeating tone (con). Tone Volume This feature allows the oven tone volume to be adjusted between high, medium (default), low, and off. Clock Setting This feature specifies how the time of day will be displayed. Options are for a standard 12-hour clock with AM and PM selections, 24-hour military time display, or for no display. 10 Auto Recipe Conversion When using Convection Bake or Convection Bake Multi cooking modes, Auto Recipe conversion will automatically reduce the programmed cooking temperature. Note that this option does not convert convection baking times, only temperatures. 12-hour Shutoff When this feature is turned on, the oven will automatically turn off after 12 continuous hours of use. Default This feature resets all of the special features to the default settings originally on the oven. 49-80668-2