GE WSLP1500JWW Installation Instructions - Page 13
Washer Connections for Portable Model, TO CONNECT THE WASHER
UPC - 084691183143
View all GE WSLP1500JWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installation Instructions WASHER CONNECTIONS FOR PORTABLE MODEL WSLP1500- ONE-FAUCET CONNECTIONS Use the hose connector provided with the washer for a one-faucet connection. TO CONNECT THE WASHER: 1 REMOVE THE UNI-COUPLE® HOSE FROM INSIDE THE WASHER BASKET 3 CONNECT TO VALVE INLET Attach the COLD water supply connector to the COLD water valve inlet (color BLUE). Make sure the washer is inside the connector before tightening. COLD Water Supply Connector Drain Connection Faucet Connector Water Filter Uni-Coupler Hose 4 TIGHTEN CONNECTOR Tighten the connector, ensuring the threads are aligned properly for tightest fit. Inspect for kinks or binding of the hose. NOTE: Do not remove the plastic cap from the HOT water inlet for uni-coupler connections as leakage may occur. Plastic Cap 2 CONNECT TO WATER LINE Attach the hose connector to the faucet adapter by pulling down on the locking collar while lifting up on the connector until it snaps into place. Make sure the water filter provided is in place. Locking Collar 5 CONNECT DRAIN HOSE Attach the drain hose to the rear of the washer. Install the clamp on the drain hose and tighten to prevent leakage of water. Hose Connector 13