Gigabyte B760M AORUS ELITE AX BIOS Setup Guide - Page 17

Settings, PEG ASPM, DMI ASPM, Platform Power

Page 17 highlights

Settings ƒƒ Platform Power && PEG ASPM Allows you to configure the ASPM mode for the device connected to the CPU PEG bus. && PCH ASPM Allows you to configure the ASPM mode for the device connected to Chipset's PCI Express bus. && DMI ASPM Allows you to configure the ASPM mode for both CPU side and Chipset side of the DMI link. && S3 Save Mode Allows you to determine whether to let the system enter power-saving mode in system S3 state. && ErP Determines whether to let the system consume least power in S5 (shutdown) state. Note: When this item is set to Enabled, the Resume by Alarm function becomes unavailable. && Soft-Off by PWR-BTTN Configures the way to turn off the computer in MS-DOS mode using the power button. Instant-Off Press the power button and then the system will be turned off instantly. Delay 4 Sec. Press and hold the power button for 4 seconds to turn off the system. If the power button is pressed for less than 4 seconds, the system will enter suspend mode. - 17 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29

- 17 -
Settings
&
PEG ASPM
Allows you to configure the ASPM mode for the device connected to the CPU PEG bus.
&
PCH ASPM
Allows you to configure the ASPM mode for the device connected to Chipset's PCI Express bus.
&
DMI ASPM
Allows you to configure the ASPM mode for both CPU side and Chipset side of the DMI link.
&
S3 Save Mode
Allows you to determine whether to let the system enter power-saving mode in system S3 state.
&
ErP
Determines whether to let the system consume least power in S5 (shutdown) state.
Note: When this item is set to
Enabled
, the Resume by Alarm function becomes unavailable.
&
Soft-Off by PWR-BTTN
Configures the way to turn off the computer in MS-DOS mode using the power button.
±
Instant-Off
Press the power button and then the system will be turned off instantly.
±
Delay 4 Sec.
Press and hold the power button for 4 seconds to turn off the system. If the power
button is pressed for less than 4 seconds, the system will enter suspend mode.
±
Platform Power