Gigabyte B760M AORUS ELITE AX BIOS Setup Guide - Page 21

&& IPv4 HTTP Support Enables or disables HTTP boot support for IPv4. This item is configurable only when Network Stack is enabled. && IPv6 PXE Support Enables or disables IPv6 PXE Support. This item is configurable only when Network Stack is enabled. && IPv6 HTTP Support Enables or disables HTTP boot support for IPv6. This item is configurable only when Network Stack is enabled. && PXE boot wait time Allows you to configure how long to wait before you can press to abort the PXE boot. This item is configurable only when Network Stack is enabled. && Media detect count Allows you to set the number of times to check the presence of media. This item is configurable only when Network Stack is enabled. ƒƒ NVMe Configuration Displays information on your M.2 NVME PCIe SSD if installed. ƒƒ SATA Configuration && SATA Controller(s) Enables or disables the integrated SATA controllers. && Aggressive LPM Support Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset SATA controllers. && Port Enables or disables each SATA port. && SATA Port DevSlp Allows you to determine whether to let the connected SATA device go into sleep mode. && Hot plug Enables or disable the hot plug capability for each SATA port. && Configured as eSATA Enables or disables support for external SATA devices. ƒƒ VMD setup menu Allows you to configure the VMD controllers. To create RAID configurations, set Enable VMD controller to Enabled and set Enable VMD Global Mapping to Disabled. Then depending on the SATA/M.2 connector you use, set the corresponding Map this Root Port under VMD item to Enabled. Please navigate to the "Configuring a RAID Set" page of GIGABYTE's website for instructions on configuring a RAID array. ƒƒ Ethernet Controller / PCIe GBE Family Controller This sub-menu provides information on LAN configuration and related configuration options. - 21 -