Gigabyte B760M AORUS ELITE AX BIOS Setup Guide - Page 6

Smart Fan 6 Use the function key to quickly switch to this screen. This screen allows you to configure fan speed related settings for each fan header or monitor your system/CPU temperature. && TUNE ALL Allows you to apply the current settings to all fan headers. && Temperature Displays the current temperature of the selected target area. && Fan Speed Displays current fan/pump speeds. && Flow Rate Displays the flow rate of your water cooling system. Press on Fan Speed to switch to this function. && Fan Speed Control Allows you to determine whether to enable the fan speed control function and adjust the fan speed. Normal Allows the fan to run at different speeds according to the temperature. You can adjust the fan speed on the FAN Control page of GIGABYTE Control Center based on your system requirements. Silent Allows the fan to run at slow speeds. Manual Allows you to drag the curve nodes to adjust fan speed. Or you can use the EZ Tuning feature. After adjusting the node position, press Apply to automatically calculate the slope of the curve. Full Speed Allows the fan to run at full speeds. && Fan Control Use Temperature Input Allows you to select the reference temperature for fan speed control. && Temperature Interval Allows you to select the temperature interval for fan speed change. && FAN/PUMP Control Mode Auto Lets the BIOS automatically detect the type of fan installed and sets the optimal control mode. Voltage Voltage mode is recommended for a 3-pin fan/pump. PWM PWM mode is recommended for a 4-pin fan/pump. - 6 -