Gigabyte GA-7DXR User Manual - Page 101
RAID/SCSI Boot Order, Floppy Drive Seek, BootUp Num-Lock, Password Check, HDD S.M.A.R.T. Capability
View all Gigabyte GA-7DXR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
7DXR Motherboard IDE-0~3 SCSI/RAID CDROM ZIP Disabled LAN Set your boot device priority to IDE-0~3. Set your boot device priority to SCSI/RAID. Set your boot device priority to CDROM. Set your boot device priority to ZIP. Disable this function. Set your boot device priority to LAN. • RAID/SCSI Boot Order RAID, SCSI Select Boot first from RAID/ATA100 device on board. (Default value) SCSI, RAID Select Boot first from SCSI device on the add-on PCI SCSI card. • Floppy Drive Seek During POST, BIOS will determine if the floppy disk drive installed is 40 or 80 tracks. 360 type is 40 tracks while 720, 1.2 and 1.44 are all 80 tracks. Enabled Disabled BIOS searches for floppy disk drive to determine if it is 40 or 80 tracks. Note that BIOS can't differentiate between from 720, 1.2 or 1.44 drive type as they are all 80 tracks. BIOS will not search for the type of floppy disk drive by track number. Note that there will not be any warning message if the drive installed is 360. (Default Value) • BootUp Num-Lock On Keypad is number keys. (Default value) Off Keypad is arrow keys. • Password Check Please refer to the detail on P.116. System Setup The user must enter correct password in order to access the system and/or BIOS Setup. The user must enter correct password in order to access BIOS setup utility. (Default Value) • HDD S.M.A.R.T. Capability Enabled Disabled Enable HDD S.M.A.R.T. Capability. Disable HDD S.M.A.R.T. Capability. (Default value) 95