Gigabyte GA-7DXR User Manual - Page 88
Rebuilding A Mirrored Array
View all Gigabyte GA-7DXR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Raid Introduction Rebuilding A Mirrored Array The Rebuild Array Menu option is necessary to recover from an error in a mirrored disk array. You will receive an error message when booting your system from the BIOS. NOTE: Drives MUST be replaced if they contain any physical errors. Follow these steps BEFORE using the Rebuild Array menu option: 1. On bootup, the system Startup BIOS will display an error message identifying which drive has failed. 2. Press keys to enter FastBuild Main Menu. 3. Select submenu Define Array . 4. Select the failed array and identify the Channel and ID of the failed drive. 5. Power off and physically remove the failed drive. 6. Replace the drive with an identical model. 7. Reboot the system and enter the FastBuild Main Menu. 8. Select the Rebuild Array option. The following screen will appear. FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc. [ Rebuild Array Menu ] Array No Array 1 Array 2 Array 3 Array 4 RAID Mode Mirror Stripe Stripe -- Total Drv 2 1 1 -- Capacity(MB) 16126 8063 8063 -- Status Critical Functional Functional -- [ Keys Available ] [↑] Up [↓] Down [ESC] Exit [Enter] Select 9. Highlight the array whose Status is "Critical". 10. Press [Enter]. The following screen will then appear (see next page). 82