Gigabyte GA-7DXR User Manual - Page 80
Manually Creating an Array
View all Gigabyte GA-7DXR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Raid Introduction Manually Creating an Array The Define Array option from the Main Menu allows users to begin the process of manually defining the drive elements and RAID levels for one or multiple disk arrays attached to this motherboard. Users will commonly create one or two drive arrays with the motherboard, though the motherboard will support a maximum of four arrays1. NOTE: For most installations, We recommends the Auto Setup for easy disk array creation. FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc. [Define Array Menu] Array No Array 1 Array 2 Array 3 Array 4 RAID Mode Stripe -- -- -- Note: * - Bootable Array Total Drv Capacity(MB) 2 16126 -- -- -- -- -- -- [ Keys Available ] Status Functional -- -- -- [↑] Up [↓] Down [ESC] Exit [Enter] Select [Space] Change Boot Drive 1. To manually create an array from the Define Array Menu, use the arrow keys to highlight the array number you wish to define, and press [Enter] to select. 2. The Define Array Definition Menu will next appear that allows drive assignments to the disk array (see next page). 1 A user may use a single drive in either striping mode with system. In this rare scenario, the motherboard will create an individual array ID but will offer conventional controller performance, depending on the drive type. At a later time, a second drive can be added to the array and the array re-created to support RAID 1 mirroring. 74