Gigabyte GA-A75-UD4H User Manual - Page 15
Installing the APU Cooler, Refer to your APU cooler installation
View all Gigabyte GA-A75-UD4H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
1-3-2 Installing the APU Cooler Follow the steps below to correctly install the APU cooler on the APU. (The following procedure uses the GIGABYTE cooler as the example.) Step 1: Apply an even and thin layer of thermal grease on the surface of the installed APU. Step 2: Place the APU cooler on the APU. Step 3: Hook the APU cooler clip to the mounting lug on one side of the retention frame. On the other side,push straight down on the the APU cooler clip to hook it to the mounting lug on the retention frame. Step 4: Turn the cam handle from the left side to the right side (as the picture above shows) to lock into place. (Refer to your APU cooler installation manual for instructions on installing the cooler.) Step 5: Finally, attach the power connector of the APU cooler to the APU fan header (CPU_FAN) on the motherboard. Use extreme care when removing the APU cooler because the thermal grease/tape between the APU cooler and APU may adhere to the APU. Inadequately removing the APU cooler may damage the APU. - 15 - Hardware Installation