Gigabyte GA-A75-UD4H User Manual - Page 26
SATA3_0/1/2/3/4 SATA 6Gb/s Connectors, Controlled by AMD A75 Chipset, ports RAID 0, RAID 1
View all Gigabyte GA-A75-UD4H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
DEBUG PORT 7) SATA3_0/1/2/3/4 (SATA 6Gb/s Connectors, Controlled by AMD A75 Chipset) The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 1.5Gb/s standards. Each SATA connector supports a single SATA device. The AMD A75 Chipset supports RAID 0, RAID 1, RAID 10, and JBOD. Refer to Chapter 5, "Configuring SATA Hard Drive(s)," for instructions on configuring a RAID array. SATA3_1 7 7 SATA3_0 G.QBOFM G.QBOFM 1 7 SATA3_3 1 SATA3_4 1 SATA3_2 Pin No. 1 2 3 4 5 6 7 Definition GND TXP TXN GND RXN RXP GND Please connect the L-shaped end of the SATA cable to your SATA hard drive. • A RAID 0 or RAID 1 configuration requires at least two hard drives. If more than two hard drives are to be used, the total number of hard drives must be an even number. • A RAID 10 configuration requires four hard drives. EBUG ORT Hardware Installation - 26 -