Gigabyte GA-F2A88X-UP4 User Manual - Page 51
SATA Hot Plug on PORT0~SATA Hot Plug on PORT7, SATA Power on PORT0~SATA Power on PORT7
View all Gigabyte GA-F2A88X-UP4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
&& Integrated Graphics Enables or disables the onboard graphics function. Auto The BIOS will automatically enable or disable the onboard graphics depending on the graphics card being installed. (Default) Disabled Disables the onboard graphics. Force Always activates the onboard graphics, whether or not a PCI Express card is installed. && UMA Frame Buffer Size This item is configurable only when Integrated Graphics is set to Force. Frame buffer size is the total amount of system memory allocated solely for the onboard graphics controller. MS-DOS, for example, will use only this memory for display. Options are: Auto (default), 256M, 512M, 1G, 2G. `` ATA Port Information This section provides information on the device connected to each SATA port controlled by AMD Chipset. `` SATA Configuration && SATA Hot Plug on PORT0~SATA Hot Plug on PORT7 Enables or disable the hot plug capability for each SATA port. (Default: Disabled) && SATA Power on PORT0~SATA Power on PORT7 Enables or disables each SATA port. (Default: Enabled) `` Super IO Configuration This section provides information on the super I/O chip and allows you to configure the serial port. && Serial Port A Enables or disables the onboard serial port. (Default: Enabled) - 51 - BIOS Setup