Gigabyte GA-F2A88X-UP4 User Manual - Page 61
All available, space, Disks, User Input
View all Gigabyte GA-F2A88X-UP4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
The selection bar will move to the Disks section on the right of the screen. Select the hard drives to be included in the RAID array. Use the up or down arrow key to select a hard drive and press . The selected hard drive will be shown in green. To use all of the hard drives, simply press to select all. Then press and the selection bar will move to the User Input section on the left bottom of the screen. (Figure 10) AMD-RAID Array Configuration (Build: 6.1.1-00075) RAID0: Stripe set - distributes space across disks for higher performance Arrays Disks 0-00, 79GB, Ready 1-01, 79GB, Ready Disks: 0, 1 Type: RAID 0 Create Array User Input Select Array Type to Create RAID5 RAID10N RAID0 RAID1N RAID1 Volume RAID10 RAIDABLE RAID50 Available Keys =Choose, =Back =Select Menu Item Figure 10 First, select a RAID mode and press . The selections available depend on the number of the hard drives being installed. Then follow the on-screen instructions to specify the array size. You can select All available space to use the maximum size allowed or use the up or down arrow key to adjust the size (Figure 11) and press . AMD-RAID Array Configuration (Build: 6.1.1-00075) Arrays 0-00, 79GB, Ready 1-01, 79GB, Ready Disks Disks: 0, 1 Type: RAID 0 Total Size: 158GB Create Array User Input Choose Size to Make Array Size Chosen: All available space DOS Size: 147GB Exactly: 158, 892, 818, 432 Available Keys =Change Size =Complete, =Go Back Figure 11 - 61 - Configuring SATA Hard Drive(s)