Gigabyte GA-K8NSNXP User Manual - Page 48

English Power Management Setup CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Power Management Setup ACPI Suspend Type Soft-Off by PWR-BTTN PME Event Wake Up Modem Ring On S3 Resume by USB device Resume by Alarm x Day of Month Alarm x Time (hh:mm:ss) Alarm Power On by Mouse Power On by Keyboard x KB Power ON Password AC BACK Function [S1(POS)] [Instant-Off] [Disabled] [Disabled] [Disabled] [Disabled] Everyday 0 : 0 : 0 [Disabled] [Disabled] Enter [Soft-Off] Item Help Menu Level` [S1] Set suspend type to Power On Suspend under ACPI OS [S3] Set suspend type to Suspend to RAM under ACPI OS KLJI: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults ACPI Suspend Type S1(POS) Set ACPI suspend type to S1/POS (Power On Suspend). (Default value) S3(STR) Set ACPI suspend type to S3/STR (Suspend To RAM). Soft-Off by PWR-BTTN Instant-off Press power button then power off instantly. (Default value) Delay 4 Sec. Press power button 4 seconds to power off. Enter suspend if button is pressed less than 4 seconds. PME Event Wake Up This feature requires an ATX power supply that provides at least 1A on the 5VSB lead. Disabled Disable this function. (Default value) Enabled Enable PME as wake up event. Modem Ring On An incoming call via modem can awake the system from any suspend state. Disabled Disable Modem Ring on function. (Default value) Enabled Enable Modem Ring on function. S3 Resume by USB device Disabled Disable this function. (Default value) Enable Enable USB device wake up system from S3 suspend type. Resume by Alarm You can set "Resume by Alarm" item at "Enabled" and key in data/time to power on system. Disabled Disable this function. (Default value) Enabled Enable alarm function to POWER ON system. If RTC Alarm Lead To Power On is Enabled. Day of Month Alarm : Everyday, 1~31 Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59) GA-K8NSNXP Motherboard - 48 -