Gigabyte GA-M68SM-S2 Manual - Page 40
Onchip SATA Mode nVIDIA - lan drivers
View all Gigabyte GA-M68SM-S2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
English NV SATA Pri-Master RAID Enables or disables RAID for the first SATA 3Gb/s connector (SATAII0). This item is configurable only if the Onchip SATA Mode item is set to RAID. (Default: Enabled) NV SATA Pri-Slave RAID Enables or disables RAID for the second SATA 3Gb/s connector (SATAII1). This item is configurable only if the Onchip SATA Mode item is set to RAID. (Default: Enabled) NV SATA Sec-Master RAID Enables or disables RAID for the third SATA 3Gb/s connector (SATAII2). This item is configurable only if the Onchip SATA Mode item is set to RAID. (Default: Enabled) NV SATA Sec-Slave RAID Enables or disables RAID for the fourth SATA 3Gb/s connector (SATAII3). This item is configurable only if the Onchip SATA Mode item is set to RAID. (Default: Enabled) On-Chip IDE Channel0 Enables or disables the integrated IDE controller. (Default: Enabled) IDE DMA transfer access Enables or disables DMA (Direct Memory Access) mode for the IDE device(s). Disabled turns off DMA mode for the IDE device(s) and lets it operate in PIO (Programmed Input/Output) mode. (Default: Enabled) On-Chip MAC Lan Enables or disables the onboard LAN function. (Default: Auto) If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled. NV Serial-ATA 1 Enables or disables the integrated SATA controller. (Default: Enabled) IDE Prefetch Mode Enables or disbales prefetch mode for the integrated IDE controller. Enabled activates the IDE prefetch buffer to enhance hard drive performance. (Default: Enabled) Onchip SATA Mode (nVIDIA® GeForce 7025/nForce 630a chipset) Enables or disables RAID for the SATA controllers integrated in the nVIDIA® GeForce 7025/ nForce 630a chipset. IDE Disables RAID for the SATA controller and configures the SATA controller to PATA mode. (Default) AHCI Configures the SATA controller to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. RAID Enables RAID for the SATA controller. Onboard Audio Function Enables or disables the onboard audio function. (Default: Auto) If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to Disabled. Onboard 1394 Enables or disables the onboard IEEE 1394 function. (Default: Enabled) GA-M68SM-S2 Motherboard - 40 -