Gigabyte GA-M68SM-S2 Manual - Page 69
C. Configuring RAID set in RAID BIOS
View all Gigabyte GA-M68SM-S2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
English C. Configuring RAID set in RAID BIOS Enter the RAID BIOS setup utility to configure a RAID array. For a non-RAID configuration, please skip this step and proceed to the installation of Windows operating system. Step 1: After the POST memory test begins and before the operating system boot begins, look for a message which says "Press F10 to enter RAID setup utility" (Figure 3). Hit the key to enter the NVIDIA RAID setup utility. MediaShield ROM BIOS 10.0.0.5 Copyright (C) 2007 NVIDIA Corp. Detecting array ... Press F10 to enter RAID setup utility ... Figure 3 Step 2: The Define a New Array screen is the first option screen when you enter the NVIDIA RAID setup utility. (Figure 4). You can press the key to move from field to field until the appropriate field is highlighted. Step 3: In the RAID Mode field, use the up or down arrow key to select a RAID mode. The supported RAID modes include Mirrored, Striped, Striped Mirror, Spanned and RAID5. The following procedure demonstrates how a RAID 0 array is created. Step 4: If RAID 0 (Striped) is selected, you can manually set the stripe block size. In the Stripe Block field, use the up or down arrow key to set the stripe block size. Stripe block size is given in kilobytes. We recommend you leaving it at the default Optimal, which is 64 KB. The stripe block size can be set from 4 KB to 128 KB RAID Mode: Striped MediaShield Utility Apr 16 2007 - Define a New Array - Stripe Block: Optimal Free Disks Port Disk Model 1 ST3120026AS 2 ST3120026AS Capacity 111.79GB 111.79GB Array Disks Port Disk Model [J] Add Capacity [I] Del [ESC] Quit [F6] Back [F7] Finish [TAB] Navigate [KL] Select [ENTER] Popup Figure 4 - 69 - Appendix