Gigabyte GA-M68SM-S2 Manual - Page 76
B. Installing Windows Vista
View all Gigabyte GA-M68SM-S2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
English B. Installing Windows Vista Step 1: Restart your system to boot from the Windows Vista setup disk and perform standard OS installation steps. When a screen similar to that below appears (RAID or AHCI hard drive(s) will not be detected at this stage), select Load Drivers. (Figure 6). Figure 6 Step 2: Specify the location where the driver is saved, such as your floppy disk (Figure 7). Figure 7 GA-M68SM-S2 Motherboard - 76 -
GA-M68SM-S2 Motherboard
- 76 -
English
B. Installing Windows Vista
Step 1:
Restart your system to boot from the Windows Vista setup disk and perform standard OS installation
steps. When a screen similar to that below appears (RAID or AHCI hard drive(s) will not be detected at
this stage), select
Load Drivers
. (Figure 6).
Figure 6
Step 2:
Specify the location where the driver is saved, such as your floppy disk (Figure 7).
Figure 7