Gigabyte GA-SBC7100 User Manual - Page 26

USB Configuration, SATA And RST Configuration, Configured as eSATA, USB Mass Storage Driver Support

Get Gigabyte GA-SBC7100 PDF manuals and user guides View all Gigabyte GA-SBC7100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

through a serial port. `` USB Configuration && Legacy USB Support Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled) && XHCI Hand-off Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off support. (Default: Disabled) && USB Mass Storage Driver Support Enables or disables support for USB storage devices. (Default: Enabled) && Port 60/64 Emulation Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices. (Default: Disabled) && Mass Storage Devices Displays a list of connected USB mass storage devices. This item appears only when a USB storage device is installed. `` NVMe Configuration Displays information on your M.2 NVME PCIe SSD if installed. `` AMT Configuration This section allows you to enable/disable Intel® Active Management Technology (Intel® AMT) for remote computer management on hardware level and provides you with further configuration options. `` SATA And RST Configuration && SATA Controller(s) Enables or disables the integrated SATA controllers. (Default: Enabled) && SATA Mode Selection Specifies the operating mode of the integrated SATA controllers. AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. (Default) && Aggressive LPM Support Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset SATA controllers. (Default: Enabled) && Port 1/2 Enables or disables each SATA port. (Default: Enabled) && Hot plug Enables or disable the hot plug capability for each SATA port. (Default: Disabled) && Configured as eSATA Enables or disables support for external SATA devices. Allows to you set LVDS resolution and bit rate. (Default: 1024x600 6-bit) - 26 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
- 26 -
through a serial port.
`
USB Configuration
&
Legacy USB Support
Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)
&
XHCI Hand-off
Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off
support. (Default: Disabled)
&
USB Mass Storage Driver Support
Enables or disables support for USB storage devices. (Default: Enabled)
&
Port 60/64 Emulation
Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support
for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices.
(Default: Disabled)
&
Mass Storage Devices
Displays a list of connected USB mass storage devices. This item appears only when a USB storage device
is installed.
`
NVMe Configuration
Displays information on your M.2 NVME PCIe SSD if installed.
`
AMT Configuration
This section allows you to enable/disable
Intel
®
Active Management Technology
(Intel
®
AMT) for remote
computer management on hardware level and provides you with further configuration options.
`
SATA And RST Configuration
&
SATA Controller(s)
Enables or disables the integrated SATA controllers. (Default: Enabled)
&
SATA Mode Selection
Specifies the operating mode of the integrated SATA controllers.
±
AHCI
Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
&
Aggressive LPM Support
Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset
SATA controllers. (Default: Enabled)
&
Port 1/2
Enables or disables each SATA port. (Default: Enabled)
&
Hot plug
Enables or disable the hot plug capability for each SATA port. (Default: Disabled)
&
Configured as eSATA
Enables or disables support for external SATA devices.
Allows to you set LVDS resolution and bit rate. (Default: 1024x600 6-bit)