Haier 49UG2500 Use and Care Manual - Page 9
Preparation
View all Haier 49UG2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
PREPARATION IMPORTANT: Do not apply pressure to the screen display area which may compromise the integrity of the display. The manufacturer's warranty does not cover user abuse or improper installations. ATTACHING THE STAND IMPORTANT: The stand of the TV must be assembled prior to usage. 1. Place TV unit face down on a soft and flat surface (blanket, foam, cloth, etc.) to prevent any damage to the TV. 2. Fix the stand to the bottom of the TV with the four MB4 x16 mm screws. O MB4 x16 mm (4pcs ) TURNING ON THE TV 1. Install the stand and place the TV on a solid surface. i‹Min NOTE • Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover. • To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity. • Avoid heat, direct sunlight and exposure to rain or water. The equipment shall not be exposed to dripping or splashing. 2. Connect the antenna cable or cable TV cable to the ANT IN aerial socket on the back of the TV set. See "CONNECTING TO AN ANTENNA/CABLE WALL JACK" on page 9. 3. Remote control: Remove the cover of the battery compartment. Insert the 2 supplied batteries (Type AAA 1.5V). PREPARING YOUR LCD TV FOR WALL MOUNTING We suggest that you keep your TV at least 2.36 inches (60 mm) from the wall to prevent cable interference. Before mounting your TV on the wall, you need to remove the stand. For your safety, please use only with a UL listed wall mount bracket with minimum weight of the TV without stand. (Please see page 18 for the weight of the TV.) To attach a wall mount bracket to your TV: 1. Remove the screws holding your TV to the stand. 2. Remove the stand from your TV. 3. Secure the wall mount bracket to the back of your TV using four screws (see page 18 for the size of the screws). Follow the instructions of the user manual that came with the wall mount bracket to install. 4. Power: Plug the cord into a working power outlet. • NOTE The wall mount bracket are not included. 5. Turn the TV on: Press U on the remote control or POWER button on the side control panel of the TV. 7