Haier HL32XSL2 User Manual - Page 16

Operation 2.Playback status: It shows the playback status (Play, Pause, Fast Forward, Rewind). 4 Play Fast forward Pause Fast reverse 3.Playback speed: playback speed can be changed 1x,2x,4x,8x,16x,32x. 4.Playback position: The playback position is always at the center of the time bar. 5.Time scale:shows the time in half hour increments. Note RR Time Shift function is only available in DTV mode. RR The maximum recording duration is determined by the memory size of the USB drive and the signal resolution. Please use a high-speed USB 2.0 drive with a minimum of 1GB capacity. RR Time shift only supports FAT32 file-system. RR Time shift supports more than 4GB recording by using multi-file storage. RR When the maximum recording duration is reached, the oldest program would be deleted and the latest program is recorded. RR When changing channel or changing input source, the timeshift would stop automatically. RR Time shift record will store the fact of no signal. RR Time shift will store the video, audio and data service. we only support: Video streams: Max 1 stream Audio streams: Max 8 streams CC stream: No limited. RR In recording, the data is not guaranteed to be stored in the disk. If the timeshift playback plays a corrupted data block, it would show "Data lost" message to indicate that the current data is not stored correctly. RR Please connect the TV antenna or Cable TV coaxial cable to the Antenna input on the TV. Then please complete the channel scan. The Time Shift feature is available when using your ATSC tuner and QAM cable tuner. Select the desired program A Using CH+/- buttons. „„ Press CH+ button to select a channel number in number increasing direction. „„ Press CH- button to select a channel number in number decreasing direction. Note RR If skip is ON on one channel, press CH+/- button, the channel will not appear. B Also can enter channel number directly, eg:2-0. Select the desired sound Press VOL-/+ buttons on the remote or the front of the TV set to adjust the volume level. The range is 0~100. When the volume buttons are pressed the volume level is displayed automatically on the TV screen. Volume 57 Mute A Press MUTE button on the remote control and " " type face will display on the screen. At this time, the sound of the TV set is turned off. B If you want to recover the sound, press MUTE button again or directly press VOL+ button. Video menu The TV menu gives you an overview of the menus you can select. Note RR Depending on the input signal, one or more menu items may not be selectable. How to select picture mode The picture mode provides the pre-defined images settings: Standard, Vivid, Custom and Mild . 5 6 A Press MENU button and then use / button to EN-15 Haier LED HDTV