Haier HSU-12RD03 User Manual - Page 15

Operation Display board Dry Operation Remote controller 5 1. Unit start Press ON/OFF on the remote controller, unit starts. 2.Select operation mode Press MODE button. For each press, operation mode changes as follows: Remote controller: AUTO COOL DRY FAN HEAT Then Select DRY operation 3.Select temp.setting Press TEMP. button Every time the button is pressed, temp.setting increase 1oC,if kept depressed, it will increase rapidly. Every time the button is pressed, temp.setting decrease 1oC,if kept depressed, it will decrease rapidly. Select a desired temperature. 4.Fan speed selection Press FAN button. For each press, fan speed changes as follows: Remote controller: LOW MED HI AUTO 5.Unit stop Press ON/OFF button, the unit stops. About constant temperature dehumidification operation: when constant temperature dehumidification runs, if the room temperature is 3oC higher than the set temperature, the air conditioner will automatically decrease the temperature and dehumidify; if the temperature deviation is less than 3oC, the air conditioner will automatically keep the temperature and dehumidify, so these can make the temperatures of the air inside and outside near to each other and avoid the cold airflow blowing people. 10