Haier HSU-12RD03 User Manual - Page 23
Emergency and Test, Operation
View all Haier HSU-12RD03 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Operation Emergency and Test Operation Emergency operation: Use this operation only when the remote controller is defective or lost. When the emergency operation switch is pressed,the" Pi "sound is heard once, which means the start of this operation. In this operation, the system automatically selects the operation modes, cooling or heating, according to the room temperature. Temperature Operation mode Designated temperature Timer mode Air flow ABOVE 21OC COOLING 24OC NO AUTOMATIC BELOW 21OC HEATING 24OC NO AUTOMATIC It is not possible to operate in dry mode. Test operation: Test operation switch is the same as emergency switch. Use this switch in the test operation when the room temperature is below 16OC, do not use it in the normal operation. Continue to press the test operation switch for more than 5 seconds. After you hear the "Pi" sound twice, release your finger from the switch: the cooling operation starts with the air flow speed "Hi". After 30 minutes, test operation ends automatically. Removal of the restriction of emergency or test operation Press the emergency operation switch once more, or manipulate through the remote controller; the "Pi" sound, the emergency or test operation is terminated. When the remote controller is manipulated, it gets the system back to the normal operation mode. 18