Haier HSU-12RD03 User Manual - Page 19

Operation Sleep Operation Display board Before going to bed, you can simply press the SLEEP button and unit will operate in SLEEP mode and bring you a sound sleep. Use of SLEEP function After the unit starts, set the operation status, then press SLEEP button before which the clock must be adjusted and time being set. Operation Mode 1. In COOL mode 1 hours after SLEEP mode starts, temp. will become 1OC higher than temp. setting. After another 1 hours, temp. rises by 1OC further. The unit will run for further 6 hours then stops. Temp. is higher than temp. setting so that room temperature won't be too Iow for your sleep. SLEEP operation starts SLEEP operation stops Approx.6hrs 1 hr Rises 1OC 1 hr Rises 1OC Temp.setting Unit stop In COOL mode 2. In HEAT mode 1 hours after SLEEP mode starts, temp will become 2 OC ower than temp. setting. After another 1 hours, temp decrease by 2OC further. After more another 3 hours temp. rises by 1OC further. The unit will run for further 3 hours then stops. Temp. is lower than temp. setting so room temperature won't be too high for your sleep. Remote Controller Temp.setting Unit stop 1 hr Decreases 2OC 1 hr Decreases 2OC 3 hrs 3 hrs Rises 1OC SLEEP operation starts SLEEP operation stops In HEAT mode 3. In AUTO mode The unit operates in corresponding sleep mode adapted to the automatically selected operation mode. 4. In FAN mode It has no SLEEP function. 5.Set the wind speed change when sleeping If the wind speed is high or middle before setting for the sleep, set for lowing the wind speed after sleeping. If it is low wind, no change. 6.Note to the power failure resume: press the sleep button ten times in five seconds and enter this function after hearing four sounds. And press the sleep button ten times within five seconds and leave this function after hearing two sounds. NOTE: With the power failure resume, when setting the TIMER ON, TIMER OFF and TIMER ON/OFF, it's memorized as shutdown status when resuming after power out. 14