Haier RBFS21SIAS User Manual - Page 27

Problem Part.

Page 27 highlights

Trouble Shooting problem cause solution Water/ humid/ frost in the refrigerator. Water conglomeration at the bottom side of the drawer cover • Water left by the vegetables and fruits once washed in the drawer • When putting the foods into the refrigerator, clean the water first, and it is normal for some ZDWHUH[LVWDWWKHERWWRPRIWKHGUDZHU Water/ humid/ frost on the outside surface of the refrigerator. Wet air conglomeration on the outside surface of the • It is wet. The door of the refrigerator is • When it is wet, this case is normal. When the left unlocked, which causes the humidity reduces, the wet air will follow it. refrigerator or between the two meeting of the cold air in the • See the opening/ closing/ drawer Part in Part doors. refrigerator and the hot air outside Problem. the refrigerator. Automatic ice-maker • Adjust the ice-measuring pole, make it be "on" • The ice-measuring pole is "on" or at off position. or at off position. • Turn on the water supply valve. • The water supply valve isn' • See the opening/ closing/ drawer Part in Part t opened. And the deepfreeze Problem. The ice-maker doesn't make ice fridge isn't cold enough. • Turn off the water supply valve. Move the valve any more. • The saddle-backed valve on the away. cold water pipe is blocked or is • Make sure that the valve is not a self-inventing blocked by the other things. saddle-backed valve. Clean valve. Change the valve if needed. If the valve is not saddle- • Check if the water distributor can EDFNHGYDOYHLFHDQGZDWHU¿OWHUZLOOEHEORFNHG distribute water into a balance. by the other things, and then the valve must be changed. • The ice-making capacity of the ice-maker is less than what you H[SHFWHG • The ice-maker can produce about 4-5 ice-colds HYHU\  KRXUV7KH H[WUD LFH FDQ SURGXFH DW most 6 pounds of ice capacity. The ice-making capacity of the • The deepfreeze enough. fridge is not cold • See "The temperature Problem Part. is too high" part in the ice-maker is not enough. • The water supply valve is not opened completely. • Turn off the water supply pipe routine valve. • Check if the water distributor is working at a speed that is lower ,ILWLVFKDQJHWKHLFHDQGWKHZDWHU¿OWHU than that of normal case. The ice-maker cannot stop producing ice. • The ice-measuring pole of the • Move that away, release the ice-measuring ice-maker is made at the "down" pole. Move all the ice-colds frozen o n the ice- position. measuring pole. The ice has a terrible smell. • The smell of the chill-cold stogie • Cover the foods closely. Throw away the long RUWKHGHHSIUHH]HIULGJHFDQPL[ time ice. The ice-maker produces new ice. together. • The water connected to the icemaker has smell. • Increase the filter on the water supply pipe URXWLQH&RQVXOWDZDWHUSXUL¿FDWLRQFRPSDQ\ • The ice is not used frequently. • Throw away the long time ice. 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29

Trouble Shooting
problem
cause
solution
Water/ humid/ frost in the refrigerator.
Water conglomeration at the
bottom side of the drawer cover
• Water left by the vegetables and
fruits once washed in the drawer
• When putting the foods into the refrigerator,
clean the water first, and it is normal for some
Water/ humid/ frost on the outside surface of the refrigerator.
Wet air conglomeration on
the outside surface of the
refrigerator or between the two
doors.
• It is wet.
The door of the refrigerator is
left unlocked, which causes the
meeting of the cold air in the
refrigerator and the hot air outside
the refrigerator.
• When it is wet, this case is normal. When the
humidity reduces, the wet air will follow it.
• See the opening/ closing/ drawer Part in Part
Problem.
Automatic ice-maker
The ice-maker doesn’t make ice
any more.
• The ice-measuring pole is “on”
or at off position.
• The water supply valve isn’
t opened. And the deepfreeze
fridge isn’t cold enough.
• The saddle-backed valve on the
cold water pipe is blocked or is
blocked by the other things.
• Check if the water distributor can
distribute water into a balance.
• Adjust the ice-measuring pole, make it be “on”
or at off position.
• Turn on the water supply valve.
• See the opening/ closing/ drawer Part in Part
Problem.
• Turn off the water supply valve. Move the valve
away.
• Make sure that the valve is not a self-inventing
saddle-backed valve. Clean valve. Change
the valve if needed. If the valve is not saddle-
by the other things, and then the valve must be
changed.
The ice-making capacity of the
ice-maker is not enough.
• The ice-making capacity of the
ice-maker is less than what you
• The deepfreeze fridge is not cold
enough.
• The water supply valve is not
opened completely.
• Check if the water distributor is
working at a speed that is lower
than that of normal case.
• The ice-maker can produce about 4-5 ice-colds
most 6 pounds of ice capacity.
• See “The temperature is too high” part in the
Problem Part.
• Turn off the water supply pipe routine valve.
The ice-maker cannot stop
producing ice.
• The ice-measuring pole of the
ice-maker is made at the “down”
position.
• Move that away, release the ice-measuring
pole. Move all the ice-colds frozen o n the ice-
measuring pole.
The ice has a terrible smell.
• The smell of the chill-cold stogie
together.
• The water connected to the ice-
maker has smell.
• The ice is not used frequently.
• Cover the foods closely. Throw away the long
time ice. The ice-maker produces new ice.
• Increase the filter on the water supply pipe
• Throw away the long time ice.
26