Hannspree SL32UMNB User Manual - Page 21

ENGLISH Auto format Enable/disable the aspect ratio selection automatically (On/Off). Advanced video Noise reduction Reduce the noise level (High/Off/Low). Light sensor Enable/disable the light sensor to detect the current level of visible light in the surrounding environment (On/Off). VGA (only shown on VGA source) Auto adjust (Sychronize the display automatically). H. Position Adjust the position of the image left and right (0~100). V. Position Adjust the position of the image up and down (0~100). Phase Adjust to reduce horizontal noise (0~31). Clock Adjust to reduce vertical noise (0~255). Note: The options available on the OSD may vary depending on the input signal source. Sound Option Sound preset Balance Audio delay Auto volume control Wide stereo Description Select a preset audio option optimized for different sounding conditions (Rock/Pop/Live/Dance/Techno/ Classic/Soft/Personal/Off). Adjust the sound balance between the left and right speakers (-50~50). Adjust the audio delay setting in millisecond (0~600). * This option will only show the channel number on the TV signal. Select to automatically adjust the volume. * This option will only appear when the input source is TV. Enable/disable the wide stereo feature (On/Off). Sound type Select the sound type setting (Stereo/Dual1/Dual2/Mono). Type Select the sound type mode (Normal/Visually impaired). Visually impaired (only available when Type is set to Visually impaired) Speaker Headphones Turn on or off the speaker (On/Off). Turn on or off the headphones (On/Off). Volume Adjust the volume level (0~100). Note: The options available on the OSD may vary depending on the input signal source. 18