Hannspree ST289MUB User Manual - Page 31

English 3.4 Adjusting Channel Settings 1 Press MENU to enter the OSD Main Menu screen. 2 Press / on the remote control or CHS / CHT on the control panel to select Channel menu. 3 Press / OK on the remote control or INPUT/ VOL+ on the control panel to enter the Channel menu. Picture Audio Channel V-CHIP Setup Antenna Scan Mode Auto Scan Channel List Move OK Enter Return Return Menu Exit 4 Press / on the remote control or CHS / CHT on the control panel to select an item. 5 Press / OK on the remote control or INPUT/ VOL+ on the control panel to enter the item. 6 Press / on the remote control or VOL+/ VOL- on the control panel to change the scales or press OK on the remote control or INPUT/ VOL+ on the control panel to mark an item. 7 Press RETURN to return to the Channel menu. 8 Press MENU/ VOL- to exit the Channel menu. 9 The Channel menu can be used to perform a channel search and edit channel list (see "Performing an Automatic Channel Search" on page 26 and "Editing Channel Table or Favorite Channel" on page 27). •The Antenna can be set to Air or Cable. •The Scan Mode can be set to Auto, Analog, or Digital. •The Auto Scan can be set to Auto, Standard, HRC, or IRC. Note: The Channel settings are available when the signal is set to TV source. 31