Hannspree ST42DMSB User Manual
Hannspree ST42DMSB Manual
 |
View all Hannspree ST42DMSB manuals
Add to My Manuals
Save this manual to your list of manuals |
Hannspree ST42DMSB manual content summary:
- Hannspree ST42DMSB | User Manual - Page 1
S_ST42D_UM_US_V02_H 42" Liquid Crystal Display Television Téléviseur à Écran à Cristaux Liquides TV de Pantalla de Cristal Líquido - Hannspree ST42DMSB | User Manual - Page 2
Safety Instructions 6 Preface 9 Warranty and Service 9 1. Getting Started 12 1.1 Package Contents 12 1.2 Introducing the TV 13 1.2.1 Features 13 1.3 Control Panel 14 1.4 Input and Output Jacks 15 1.5 Remote Control 17 1.6 Inserting the Remote Control Batteries 19 2. Setting up your TV 21 - Hannspree ST42DMSB | User Manual - Page 3
Adjusting Picture Settings 30 3.3 Adjusting Audio Settings 31 3.4 Adjusting Channel Settings 32 3.5 Adjusting V-CHIP Settings 33 3.6 Adjusting Setup Settings 34 4. Troubleshooting 35 5. Specifications 36 6. Appendix: Remote Control Guide 38 6.1 Introduction 38 6.1.2 Setting Program Codes - Hannspree ST42DMSB | User Manual - Page 4
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits not installed and used in accordance with the instructions, may cause harmful interference to radio communications for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the - Hannspree ST42DMSB | User Manual - Page 5
CAUTION This symbol is used to alert users to pay attention to important descriptions regarding usage, maintenance (repair), and additional important information related to this TV. This symbol is used to alert users to the risk of electric shocks due to dangerous and uninsulated components. 4 - Hannspree ST42DMSB | User Manual - Page 6
other strong sources of heat. Leave sufficient distance between the TV and the wall to provide enough space for the emission shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Notes: • The LCD TV is for entertainment use only - Hannspree ST42DMSB | User Manual - Page 7
openings. Install in accordance with manufacturer's instructions. 8. Do not install near any fit into your outlet, consult an electrician for replacement of the obsolete outlet. NOTE: Applies to US manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the - Hannspree ST42DMSB | User Manual - Page 8
English 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or - Hannspree ST42DMSB | User Manual - Page 9
down, or is otherwise damaged, unplug the power cord immediately and contact an authorized service technician. 5. If any fluid is sprayed or dropped into the TV, contact an authorized service technician. 6. The screen of the TV is made of glass. Avoid hitting or scraping it. If the screen is broken - Hannspree ST42DMSB | User Manual - Page 10
Preface Thank you for purchasing a Hannspree Liquid Crystal Display Television (LCD TV). Your new TV will allow you to enjoy superior audio and video while enriching your lifestyle with advanced technology. Please carefully read this manual in its entirety before setting up, using or operating your - Hannspree ST42DMSB | User Manual - Page 11
information and services available in your area. http://www.hannspree.com/us 888.808.6789 Copyright © Copyright 2010 Hannspree, Inc. All rights reserved. This manual is protected by copyright and distributed under licenses restricting its use, copying and distribution. No part of this manual may be - Hannspree ST42DMSB | User Manual - Page 12
English Trademark Notice Hannspree products incorporate High-Definition Multimedia Interface (HDMI™) technology. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing - Hannspree ST42DMSB | User Manual - Page 13
the following components are included in the box. Please contact Hannspree Customer Service immediately if anything is missing or damaged. • TV • Power cord • Remote control and batteries • User's manual • Quick start guide • Warranty card • Attention notice card • Cleaning cloth • HDMI cable 12 - Hannspree ST42DMSB | User Manual - Page 14
you connect to an external audio system or earphones. 1.2.1 Features • Built-in TV tuner • Audio/ Video support: - PC audio input - YPBPR input - AV or Composite input - S-Video input - 3.5 mm stereo earphone output - VGA input - HDMI input - USB - One set for R/L audio inputs for AV or Composite - Hannspree ST42DMSB | User Manual - Page 15
Button Power Input source Menu INPUT MENU Channel select CH Channel select CH Volume adjust Volume adjust Remote IR sensor Power/ Standby indicator Speakers VOL VOL Function Power button. Press to turn the TV on or off. Press to open the input source list or mark an item on the OSD - Hannspree ST42DMSB | User Manual - Page 16
4 VGA Connect to an antenna or cable TV. Connect to an external device, such as a DVD player, set-top box, or a PC's DVI/ set-top box, or a PC's DVI/ HDMI port. Connect to a PC's VGA port. Audio input (PC) Component inputs (video) x 2 Component inputs (audio) x 2 AUDIO IN Connect to a PC's audio - Hannspree ST42DMSB | User Manual - Page 17
) S-Video 2 input Composite input (video) Composite input (audio) Earphone output Connector USB S-VIDEO 1 VIDEO 1 L AUDIO R S-VIDEO 2 VIDEO 2 L AUDIO R Function Support JPEG and MP3 files. Connect to an external device, such as a VCR, set-top box, or a DVD player. Connect to an external device - Hannspree ST42DMSB | User Manual - Page 18
display program information. Press to turn the on-screen display (OSD) menu on/ off; confirm the setting. Press up, down, left or right to scroll through the on-screen display menus. Press to confirm the TV source selection. Press to view the EPG screen. Press to return to the previous menu. Press - Hannspree ST42DMSB | User Manual - Page 19
Mono/ Stereo/ SAP) in ATV or the audio services in DTV. Press to select a programmed DVD player. Press to select a programmed Audio Receiver/ Amp/ Home Theatre System. Press to select a programmed Cable TV set-top box or a satellite TV set-top box. Press to enter TV mode. Press to switch to favorite - Hannspree ST42DMSB | User Manual - Page 20
English 1.6 Inserting the Remote Control Batteries 1 Open the battery compartment cover at the back of the remote control (A). A 2 Insert the batteries paying attention to the polarity markings inside the battery compartment (B). B 3 Close the battery compartment cover (C). C 19 - Hannspree ST42DMSB | User Manual - Page 21
. Replace only with the same or equivalent type recommended by the equipment manufacturer. Discard used batteries according to manufacturer's instructions. • Refer to your local recycling or waste disposal rules and contact a local waste disposal vendor to dispose of used batteries. • The remote - Hannspree ST42DMSB | User Manual - Page 22
English 2 Setting up your TV 2.1 Basic Connections 2.1.1 Power Connection 1 Connect the power cord to the AC IN input jack on the rear of the TV. 2 Insert the plug at the other end of the power cord into a power outlet. 2.1.2 Connecting an Antenna or Cable TV Connect one end of the VHF/UHF (Antenna - Hannspree ST42DMSB | User Manual - Page 23
English 2.2 Connecting External Devices Connect external devices such as VCRs, set-top box, DVD players, video game consoles, earphones, or a PC to the TV using the appropriate ports on the rear of the TV. 2.2.1 Connecting External Earphones Headphones Speakers (Built-in Amplifiers) Note: • - Hannspree ST42DMSB | User Manual - Page 24
English 2.2.2 Connecting to AV Devices A HDMI IN 1 2 HDMI 4 3 or B AUDIO VIDEO R L PR PB Y or C R-AUDIO-L VIDEO S-VIDEO 1 Audio Cable (Optional) HDMI Cable (Optional) Video Cable (Optional) Audio/ Video Cable (Optional) HDMI R L PR PB Y R L VIDEO S-VIDEO Game Console VCR or - Hannspree ST42DMSB | User Manual - Page 25
box/ DVD Player Using Video Inputs Connect the TV to a VCR/set-top box/ DVD player using the video inputs. VCR STB DVD Video Cable (Optional) Audio Cable (Optional) Y PB PR VIDEO L AUDIO R 1 2 S-VIDEO 1 L AUDIO R 1 Video Cable (Optional) Audio Cable (Optional) VCR STB DVD Video Cable - Hannspree ST42DMSB | User Manual - Page 26
of the PC. 2 Connect the PC LINE IN port of your TV to the line out port of the PC to listen to audio from the PC. AUDIO IN VGA VGA Cable PC (Optional) Audio Cable (Optional) 2.2.5 Connecting a PC using DVI Connect the TV to your PC to use it as the monitor using the - Hannspree ST42DMSB | User Manual - Page 27
HDMI cable is connected, connecting the audio cable is not necessary. However, it is necessary to do so if a HDMI to DVI cable is connected. 2.2.7 Connecting USB Connect the USB flash drive to the TV using the USB port as shown. The JPEG and MP3 files are supported. USB USB Flash Drive (Optional - Hannspree ST42DMSB | User Manual - Page 28
Press again. The power LED changes from green to red, indicating that the TV is off. 2.3.2 Switching Source Signals Press INPUT on the control panel or remote control to select the incoming source signal to set TV source for channel search. Press OK to confirm. 2.3.3 Performing an Automatic Channel - Hannspree ST42DMSB | User Manual - Page 29
again or press the volume buttons to restore the original volume. 2.3.6 Editing Channel Table or Favorite Channel 1 Press MENU on the control panel or remote control, then select to enter the Channel menu. 2 Select Channel List. 3 If you want to add or remove channel from channel table, please - Hannspree ST42DMSB | User Manual - Page 30
: Quick instructions for adjusting the settings. Picture Audio Channel V-CHIP Setup Move Picture Mode Brightness Contrast Sharpness Color Tint Color Temp Back Light Digital NR Next Page OK Enter Return Return Menu Exit Function OSD Menu Up Down Increase Decrease Select Return TV Control Panel - Hannspree ST42DMSB | User Manual - Page 31
by different adjustment methods. 3.2 Adjusting Picture Settings 1 Press MENU to enter the OSD Main Menu screen. 2 Press / on the remote control or CHS / CHT on the control panel to select Picture menu. Picture Audio Channel V-CHIP Picture Mode Brightness Contrast Sharpness Color Tint Color Temp - Hannspree ST42DMSB | User Manual - Page 32
English 3.3 Adjusting Audio Settings 1 Press MENU to enter the OSD Main Menu screen. Picture Audio Audio Mode Equalizer Balance 2 Press / on the remote control or CHS / CHT on the control panel to select Channel DRC Recall V-CHIP Audio menu. Setup 3 Press / OK on the remote control or - Hannspree ST42DMSB | User Manual - Page 33
English 3.4 Adjusting Channel Settings 1 Press MENU to enter the OSD Main Menu Picture screen. Audio Antenna Scan Mode Auto Scan 2 Press / on the remote control or CHS / CHT on the control panel to select Channel menu. 3 Press / OK on the remote control or Channel V-CHIP Setup Channel List - Hannspree ST42DMSB | User Manual - Page 34
V-CHIP Settings 1 Press MENU to enter the OSD Main Menu screen. Picture Audio Enter Password Change Password Lock 2 Press / on the remote control or CHS / CHT on the control panel to select V-CHIP menu. 3 Press / OK on the remote control or Channel V-CHIP Setup Unrated Block MPAA TV Rating - Hannspree ST42DMSB | User Manual - Page 35
the OSD Main Menu screen. Picture Audio Setup Wizard OSD Language OSD Time 2 Press / on the remote control or CHS / CHT on the control panel to select Setup menu. Channel V-CHIP Setup Clock Mode Clock Set Time Zone Sleep Time Vivid Motion 3 Press / OK on the remote control or INPUT on the - Hannspree ST42DMSB | User Manual - Page 36
• Picture is OK, no sound. • • • One of the speakers has no • sound. Cannot receive some TV • channels using cable TV. Want to reset TV settings. • Cannot operate menus. • Screen image turns over. • • Snow appears on the screen. • • Blurred or overlapped • images. • • • • Remote - Hannspree ST42DMSB | User Manual - Page 37
5 Specifications English LCD Panel Size Screen Format Panel Resolution TV System Video System Photo System Audio System Built-in Stereo Amplifier Output Power Consumption Power Supply Dimension W x H x D Weight 42 inch TFT 16:9 1920 (H) x 1080 (V) ATV: NTSC DTV: ATSC AV (CVBS) x2 S-Video x2 - Hannspree ST42DMSB | User Manual - Page 38
(MHz) 25.175 40.000 65.000 108.000 106.500 146.250 148.500 VGA DVI to HDMI V V V V V V V V V V V V V V Video Mode Support Timing Resolution (active dot) 640x480p@60Hz 720x480i@60Hz 720x480p@60Hz 1280x720p@60Hz 1920x1080i@60Hz 1920x1080p@60Hz HDMI V V V V V V YPbPr V V V V V 37 - Hannspree ST42DMSB | User Manual - Page 39
English 6 Appendix: Remote Control Guide 6.1 Introduction The electronic equipment type switch buttons are used for switching the current electronic equipment type on the remote control. The remote control includes 4 electronic equipment types: DVD, AUDIO, CABLE and TV. The remote control keypad - Hannspree ST42DMSB | User Manual - Page 40
is valid; otherwise the indicator light comes on again after going off for 6 seconds, prompting user to re-enter mode codes. 3. If setting is successful, the electronic equipment code-searching state is entered upon releasing the electronic equipment button. The POWER signal of all manufacturers - Hannspree ST42DMSB | User Manual - Page 41
equipment button, press VOL- twice consecutively to cancel volume lock under current mode (for example, if volume lock was set under TV mode and you wish to transmit code values under current DVD mode, just perform this unlock operation, while those electronic equipment modes not operated still have - Hannspree ST42DMSB | User Manual - Page 42
electronic equipment buttons to enter factory setting operation mode. 5. The default current electronic equipment is TV upon first power-on. Electronic equipment Code Note TV 1001 Provided by manufacturer CABLE -- Transmit TV code AUDIO -- Transmit TV code DVD -- Transmit TV code 41 - Hannspree ST42DMSB | User Manual - Page 43
restores factory setting, and all electronic equipment modes transmit TV-mode infrared (IR) signal until being set up through code setting. For example, setting the electronic equipment code of CABLE as '0001' stops transmitting TV code, whereas AUDIO and DVD continue to transmit TV code. 42 - Hannspree ST42DMSB | User Manual - Page 44
to other electronic equipments (AUDIO, CABLE, and DVD) are not necessarily functional, but most of those remote controls only include power control, channel control, volume control, etc. 6.2.3 Power-out Protection Capability During battery replacement, all settings are only maintained by external - Hannspree ST42DMSB | User Manual - Page 45
2102 Daewoo 2010, 2017, 2025 Dell 2102 Denon 2008 Direc TV 2059 Durabrand 2007, 2006 Electrohome 2005 Electrophonic 2005 Emerex 2002 Emerson 2102 GE 2013, 2004, 2024 General 2010 Go Video 2026 Setup Code for VCR's GoldStar 2005, 2022, 2006, 2023 HaoJie 2024 Harman - Hannspree ST42DMSB | User Manual - Page 46
2004, 2016, 2059, 2044 Pilot 2005 Pioneer 2008, 2014 Polk Audio 2016 Profitronic 2024 Proscan 2013 Protec 2015 Puslar 2007 Qisheng 2013 Randex 2005 Setup Code for VCR's RCA 2013, 2004, 2024, 2008, 2077 Realistic 2004, 2005, 2012, 2011, 2017 Replay TV 2043 Runco 2007 - Hannspree ST42DMSB | User Manual - Page 47
Daewoo 2073, 2097, 2076 Denon 2028 DVD2000 2031 Emerson 2042, 2054 Enterprise 2042 Funai 2054 Gateway 2096, 2088 GE 2032. 2058 Setup Code for DVD's Go Video 2060, 2073, 2092, 2063, 2089, 2076, 2100 Greenhill 2058 Harman/ Kardon 2041,2057 Hitachi 2040, 2052 Hiteker 2053 - Hannspree ST42DMSB | User Manual - Page 48
Setup Code for DVD's Norcent 2078 Onkyo 2029, 2046, 2064 Oritron 2051 Panasonic 2028, 2101 Philips 2029, 2036, 2050 Pioneer 2033, 2039 Polarold 2090, 2086 Polk Audio 2036 Portland 2062 Proscan 2032 Qwestar 2051 RCA 2032, 2039, 2058, 2072 Rio 2076 Rotel 2045 Sampo 2061, - Hannspree ST42DMSB | User Manual - Page 49
Code 0039 Setup Code for Satellite AlphaStar 0030 Chaparral 0011 Crossdigital 0043 48 Setup Code for Satellite Mitsubishi 0029 Motorola 0036 Next Level 0036 Setup Code for Satellite Panasonic 0013, 0026 Paysat 0028 0048 Ultimate TV 0056, 0051 Uniden 0028, 0027 US Digital - Hannspree ST42DMSB | User Manual - Page 50
3028, 3001, 3012 TAG Mclaren 3019 Tascam 3027 Teac 3027 Technics 3004 Victor 3009 Wards 3019, 3008 Setup Code for CD Yamaha 3006 Zonda 3019 Setup Code for Audio Amp's Bose 3033 GE 3011 JVC 3059 NEC 3024 Optimus 3026 Realistic 3026 Shure 3024 Sony 3034 Soundesign - Hannspree ST42DMSB | User Manual - Page 51
3044 Qisheng 3057 RCA 3036, 3057, 3044, 3029, 3039 Silsonic 3021 Sony 3037, 3054, 3045, 3058 Soundesign 3032 Stereophonics 2025 Sunfire 3050 Setup Code for Audio Amp / Tuner's Teac 3049 Technics 3043, 3055 Thorens 3042 Victor 3010 Wards 3002 Yamaha 3021, 3048, 3041 50 - Hannspree ST42DMSB | User Manual - Page 52
using the hole on the back of the stand base. *Installing the LCD TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. Please contact with Hannspree dealers in wall mount bracket. You can ask a qualified - Hannspree ST42DMSB | User Manual - Page 53
English 8 Using the Cable Organizer 1 Route the cables through the cable clamp. 52
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
 |
 |
S_ST42D_UM_US_V0
2
_H
4
2”
Liquid Crystal Display Television
Téléviseur à Écran à Cristaux Liquides
TV de Pantalla de Cristal Líquido