Hannspree ST42DMSB User Manual - Page 28
Using the TV, Turning the TV On and Off, Switching Source Signals, Performing an Automatic Channel
View all Hannspree ST42DMSB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
English 2.3 Using the TV 2.3.1 Turning the TV On and Off 1 Press on the control panel or remote control. The power LED indicator on the TV changes from red to green, indicating that the TV is on. 2 Press again. The power LED changes from green to red, indicating that the TV is off. 2.3.2 Switching Source Signals Press INPUT on the control panel or remote control to select the incoming source signal to set TV source for channel search. Press OK to confirm. 2.3.3 Performing an Automatic Channel Search Before using the TV to view programs, you need to activate the channel search first. 1 Press MENU on the control panel or remote control, then select to enter the Channel menu. 2 Select Antenna to set the signal source. (Air or Cable, default is Air) 3 Select Auto scan, then Start option. 4 Press OK on the remote control to run the channel search. 2.3.4 Selecting Channels • Press CHS on the control panel or CH on the remote control to increase the channel number. • Press CHT on the control panel or CH on the remote control to decrease the channel number. • Enter the specific channel number by pressing the number buttons on the remote control. 27