Hayward HCP Pump HCP Series LITCPOMA10 - Page 7

2.6 GENERAL INSTRUCTIONS IN RELATION TO USER SAFETY Safety during operation of the machinery supplied can only be guaranteed if it is used in accordance with the diagrams shown on page 11. It must never exceed the working conditions and limits given in this manual under Technical Characteristics. Compliance with U.S. safety standards is mandatory. Please ensure that the equipment selected is adequate for the use for which it is intended and that its condition, installation, initial and subsequent use are correct. See section on Technical Characteristics. Installation, repair and maintenance operations will be carried out in all cases with the equipment disconnected from the main power supply. While the equipment is functioning, it cannot be moved or repositioned. These operations will be carried out at all times with the machine disconnected. Pressing of the electrical on/off or safety elements will not be performed where it is damp, and special care must be taken for user's hands to be dry, and also with footwear and surfaces with which the user is in contact. Those elements of the equipment which, when functioning, are in movement or which could reach dangerous temperatures will be protected with cages or casing which will prevent accidental contact with the same. Electricity conductors, or parts which could carry current, will be suitably insulated. Other metal parts of the equipment will be correctly grounded. Spare parts that may be necessary will be originals from the manufacturer or those recommended by the manufacturer. The use of others, or originals rectified by others, is not permitted and releases the manufacturer or distributor from all liability. Risk of electrical shock, see section 6. Suction entrapment hazard, see section 7.6. 7