Hayward HYDRAPURE HydraPure Owners Manual - Page 10
Maintenance
View all Hayward HYDRAPURE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Press for 1 second and then release the UV Reset button to view remaining lamp life. The UV LED will turn off, and then flash yellow once for each 1000 hours left. (9 flashes = 9000 hours remaining). Press for 1 second and then release the Ozone Reset button to view remaining lamp life. The Ozone LED will turn off, and then flash yellow once for each 1000 hours left. (9 flashes = 9000 hours remaining). Maintenance The quartz tube requires cleaning every 12 months to ensure optimal performance. 1 Turn Off Power to unit or unplug. 2 R emove screws to lid. WARNING: Before cleaning, turn off all power to the HydraPure unit and pool pump. Allow at least 15 minutes for the lamp(s) in the unit to cool. Never remove the electrical enclosure cover without first disconnecting the power source from the HydraPure unit. Never remove the HydraPure unit's cover without turning off the pump. Before removing lamps, you must wear protective rubber gloves and safety eye wear. Do not handle a hot lamp or serious burns will occur. 3 R emove both screws to electrical enclosure cover. 4 D isconnect UV lamps from ballast. 5 R emove spring clip. 9 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS