Hayward HYDRAPURE HydraPure Owners Manual - Page 12
Confirm that there are no leaks then turn off pump.
View all Hayward HYDRAPURE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Press down evenly 11 Grinegntmly alokwesercothnetaqcut awrtizthtuthbee into the unit until the Otop of the black threaded sealing sleeve. Then place the aluminum compression washer and gasket on the quartz tube. Press down on the aluminum compression washer with an even steady pressure. Lift aluminum washer and check to make sure it is seated evenly around the circumfer- ence of the quartz tube. Replace aluminum washer. 12 Cp rAeUsTsIuOrNe:oDrownhoetnstthanedpuovmepr the unit when it is under is on. Screw on the quartz sealing nut to hand tight plus ½ turn. Turn pump on to check for leaks. Confirm that there are no leaks then turn off pump. Carefully replace lamps, spring clip and connect lamps to ballast. Reattach electronics cover and the lid. Turn power on to unit and turn pump on. 11 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS