HealthRider Crosstrainer R790 X Bike Uk Manual - Page 20

HOW TO ADJUST THE REED SWITCH If the console does not display correct feedback, the reed switch should be adjusted. To adjust the reed switch, the Left Side Shield (17) must be removed. 19 52 18 71 52 Next, locate the Reed Switch (43). Turn the Left Crank Arm (42) until the Magnet (38) is aligned with the Reed Switch. Loosen but do not remove the Screw (66). Slide the Reed Switch slightly closer to or away from the Magnet. Retighten the Screw. Turn the Crank for a moment. Repeat until the console displays correct feedback. When the Reed Switch is correctly adjusted, reattach the Left Side Shield, the Side Shield Cover, and the Left Pedal. 38 43 66 42 Remove the seven Screws (52) from the Right Side Shield (18). Next, remove the Round Head Screw (71) from the right side of the Side Shield Cover (19). 19 71 24 17 66 HOW TO MOVE THE EXERCISE CYCLE To move the exercise cycle, first stand in front of the exercise cycle, hold the handlebars, and place one Place your foot here foot on the front stabiliser. Pull Wheel the handlebars until the exer- cise cycle can be moved on the front wheels. Carefully move the exercise cycle to the desired location and then lower it. Using an adjustable wrench, turn the Left Pedal (24) clockwise and remove it. Next, remove the two Screws (66) from the Left Side Shield (17). Remove the Round Head Screw (71) from the left side of the Side Shield Cover (19) and lift it off. Gently remove the Left Side Shield. 20