HealthRider H200t Instruction Manual - Page 12

start both Screws, and then tighten them., Make sure not to pinch the Upright Wire 81

Get HealthRider H200t PDF manuals and user guides View all HealthRider H200t manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

10. Identify the Right and Left Trays (27, 36). Attach the Trays (27, 36) to the Console Base (64) with eight #8 x 1/2" Screws (1); do not overtighten the Screws. Reattach the Console Frame (18) with the six #8 x 3/4" Screws (2) and the two Console Clamps (41) that you removed in step 9; do not overtighten the Screws. 10 2 2 18 1 27 1 41 2 41 2 1 1 64 36 11. IMPORTANT: To avoid damaging the Pulse Crossbar (93), do not use power tools and do not overtighten the #10 x 3/4" Screws (9). Orient the Pulse Crossbar (93) as shown. Attach 11 9 86 28 5 F the Pulse Crossbar to the Handrails (86) with two #10 x 3/4" Screws (9) and two #10 Star Washers 93 (5); start both Screws, and then tighten them. Make sure not to pinch the Upright Wire (81) or the handrail wires (F). Next, firmly tighten the four 5/16" x 2 1/2" Screws (28). Then, remove the wire tie from the Upright Wire (81). 9 5F 28 86 81 Wire Tie 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
12
64
27
36
1
1
1
10
10.
Identify the Right and Left Trays (27, 36).
Attach the Trays (27, 36) to the Console Base
(64) with eight #8 x 1/2" Screws (1);
do not
overtighten the Screws.
Reattach the Console Frame (18) with the six #8
x 3/4" Screws (2) and the two Console Clamps
(41) that you removed in step 9;
do not over-
tighten the Screws.
1
18
41
41
2
2
2
2
11.
IMPORTANT: To avoid damaging the Pulse
Crossbar (93), do not use power tools and do
not overtighten the #10 x 3/4" Screws (9).
Orient the Pulse Crossbar (93) as shown. Attach
the Pulse Crossbar to the Handrails (86) with two
#10 x 3/4" Screws (9) and two #10 Star Washers
(5);
start both Screws, and then tighten them.
Make sure not to pinch the Upright Wire (81)
or the handrail wires (F).
Next, firmly tighten the four 5/16" x 2 1/2"
Screws (28).
Then, remove the wire tie from the Upright Wire
(81).
11
9
9
5
5
28
28
86
93
86
F
F
81
Wire
Tie