HealthRider H200t Instruction Manual - Page 16

19. Note: If the treadmill is assembled on a smooth surface, it may roll forward during this step. Raise the Frame (56) to the upright position. Have a second person hold the Frame until step 21 is completed. Remove the two 5/16" x 3/4" Screws (4) from the Latch Crossbar (38). Orient the Latch Crossbar (38) as shown. Make sure that the "This side toward belt" sticker (H) is facing the treadmill. Attach the Latch Crossbar to the brackets on the Frame (56) with the two 5/16" x 3/4" Screws (4) that you just removed and two 5/16" Star Washers (11). 19 11 4 56 Brackets 38 H 11 4 20. Remove the 5/16" Nut (12) and the 5/16" x 1 3/4" Bolt (6) from the bracket on the Base (94). 20 Next, orient the Storage Latch (53) as shown. Attach the lower end of the Storage Latch (53) to the bracket on the Base (94) with the 5/16" x 1 3/4" Bolt (6) and the 5/16" Nut (12). Then, raise the Storage Latch (53) to a vertical position, and remove the tie (I). I 53 12 94 6 16