HealthRider H200t Instruction Manual - Page 14
When You Turn On The Power., The Console May Become Damaged
View all HealthRider H200t manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
15. Attach the Tray (88) to the Upright Crossbar (31) with four #8 x 3/4" Screws (2); start all four 15 Screws, and then tighten them. 88 16. Insert the Upright Wire (81) and the handrail wire (F) through the two indicated looped ties on the 16 console assembly (G). See the inset drawing. Connect the Upright Wire (81) and the handrail wire (F) to the console wires. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Insert all excess wires into the console assembly (G). Then, pull the two ties tight against the wires and cut off the ends of the ties. 2 31 2 G Ties Console 81 Wire F Console Wires 81 F 14