HealthRider H55t Treadmill English Manual - Page 12
Press the Left Handrail Cover 73 and a Right - key
View all HealthRider H55t Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
11. A ttach a Left Handrail Cover (73) to the lower end of the Left Handrail (71) with two #8 x 3/4" 11 Screws (6). Be careful not to overtighten the Screws. Press the Left Handrail Cover (73) and a Right Handrail Cover (74) together around the Left Handrail (71) and the Left Upright (75). Attach the other Covers (not shown) around the Right Handrail (72) as described above. 73 71 75 6 72 74 12. Raise the Frame (49) to the position shown. Have a second person hold the Frame until this step is completed. Orient the Storage Latch (51) so that the large barrel and the latch knob are oriented as shown. Attach the lower end of the Storage Latch (51) to the Base (80) with a 3/8" x 2" Bolt (13) and a 3/8" Nut (3). Attach the upper end of the Storage Latch (51) to the Frame (49) with a 3/8" x 1 3/4" Screw (12). Lower the Frame (49) (see HOW TO LOWER THE TREADMILL FOR USE on page 22). 12 49 12 Latch Knob 51 Large Barrel 13 3 80 13. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra hardware may be included. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see pages 24 and 25). 12