HealthRider Hotel Fitness Rb9700 Bike English Manual - Page 9

9. While another person holds the Console (4) near the Upright (2), connect the console wire to the Main Wire Harness (43). Next, connect the console pulse wire to the Upper Pulse Wire (42). Then, connect the console ground wire to the Ground Wire (61). Insert the excess wires downward into the Upright (2). Tip: Start all screws before tightening any of them. Also, do not pinch the wires during this step. Attach the Console (4) to the Upright (2) with four M4 x 16mm Screws (77). 9 Pulse Wire 42 61 43 4 Console Wire Ground Wire Avoid pinching the wires 77 2 10. Slide the Bottom Handlebar Cover (53) upward around the underside of the Console (4) and the 10 Handlebar (7) as shown. Attach the Bottom Handlebar Cover (53) to the Handlebar (7) with two M4 x 19mm Tek Screws (75). Next, attach the Top Handlebar Cover (20) to the Handlebar (7) and the Bottom Handlebar Cover (53) with an M4 x 16mm Screw (77). 20 4 7 53 75 77 75 9