HP 1210 HP PSC 1200 series all-in-one - (English) Reference Guide - Page 11
On light, green, Black Copy, backlight, Color Copy, Explanation, What to do?, If the On light - cartridges
UPC - 844844844303
View all HP 1210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
quick start Review the table below to become familiar with the front-panel status lights that provide information about tasks that are currently being performed by your HP PSC. On/Resume Check Paper Check Print Cartridge Cancel On light (green) Black Copy Color Copy Explanation Area Area (backlight) (backlight) What to do? The On light Light is off. Light is off. Your HP PSC is turned off. Press the On button to turn is not your HP PSC on. illuminated. The On light Light is on. Light is on. Your HP PSC is turned on Begin a scan, copy, or is illuminated. and is ready for use. print job from the front panel or from the software. The On light Light is on. Light is on. Your HP PSC is processing Wait for your HP PSC to is blinking a Print, Scan, or finish processing the job. Maintenance job. The On light Light is is blinking blinking. Light is on. Your HP PSC is processing a black-and-white copy job that was started from the front panel or the software. Wait for your HP PSC to finish processing the job. The On light Light is on. Light is is blinking blinking. Your HP PSC is processing a color copy job that was started from the front panel or the software. Wait for your HP PSC to finish processing the job. Blinks faster for 3 seconds and then stays illuminated. Light is on Light is on or blinking. or blinking. Your HP PSC is busy doing another task. Wait for the current job to be completed before starting another job. In addition to providing information about current tasks, the lights on the front panel may also indicate error conditions, as described in the table below. If the On light, Check Print Cartridge light, Check Paper light, and Start Copy, Black and Start Copy, Color lights are all flashing, do the following: 1 Verify that the front-panel overlay is attached to the HP PSC. 2 Power cycle your HP PSC by disconnecting the power cord and reconnecting. reference guide 7